Professional mold inserts are an indispensable component of the mold. Its role is mainly to help the mold in the process of processing, to improve the quality of the product, so that the efficiency of production is accelerated, and the production of molds in a limited time is increased. Quantity, in order to prevent the use of good mold inserts affecting the use of molds, so its daily maintenance can not be ignored, and the matters needing attention should be well known in advance.
What are the notices about mold inserts in daily maintenance?
Key point 1. Check for the presence of foreign matter in the card slot.
The mold insert will sink after a long period of use. Once this phenomenon is found, it is necessary to open the card slot of the mold insert to see if there is any foreign matter, so as to confirm the cause of the sinking. If exists, you should clean it up in time.
Key point 2. Check the cracks and damage of the corners.
In the process of using the mold insert, it is inevitable that will encounter bumps. It can't be ignored by some small flaws. It is necessary to have a regular comprehensive inspection so that know that cracks and damage, which will affect the normal function of the mold insert, and timely repair can avoid it. .
Key point 3. Maintain the cleanliness of the gap.
Since the mold inserts will be added with lubricating oil when used, if the oil stains are used in the gap for a long time, the movement of the mold inserts will be less flexible, so the oil stains should be cleaned with special detergents. By the way, it has to be dried finally.
Key point 4. The part that is frequently active needs lubrication.
One of the great advantages of the mold insert is to prevent the mold from being damaged. For the parts that are often moving, adding some lubricating oil will not cause the phenomenon of sticking, and the wear range will be controlled in time.
The above four points are important links in the daily maintenance of mold inserts. The purpose is to solve the worries of the normal use of the mold, and it is also a longer time for the mold inserts. These daily maintenance tasks do not require too much time, and the operation is simple and time-consuming. All of them are basic maintenance working, and I believe many people can easily complete them.
skype