From what aspects can identify the plastic mold quality

In daily life, plastic mold good or bad how to distinguish is really a difficult problem, especially in the network remote control market transactions. The key barrier to identification is that unlike other products, where there are samples, the customer is able to assess whether the product is desirable based on the samples.

Plastic mold processing

The mold is customized, is the customer clearly want to open the mold, show the test or engineering drawings to the dealer, and then the dealer production and processing production manufacturing. Mold good or bad in addition to see the mold itself, also want to see this mold processing out of the goods will pass. Generally speaking, there are three key comments on the characteristics of plastic mold crafts:

I. Quality of appearance design, including data integrity, tone and glossiness;

Second, the accuracy between the outline size and the relativity of the specific position, namely the precision of the outline size and the precision of the specific position;

Three, corresponding to the main use of the physical properties, organic chemical properties, thermal properties, that is, multifunctional, therefore, if because of the three aspects of all the important links often appear difficult problems, will cause the cause of mold crafts defects and expansion.

The mold itself, the primary need to see that the mold consumption. Many customers know before the mold orders with the manufacturer to make clear the mold consumption, the choice of mold consumption is actually a choice of steel. The choice of steel is actually the choice of hardness and toughness of steel. For the mold, the hardness of selected steel, the more difficult to wear in the production process, the longer the service life. Longer life also means that the mold can produce more goods, which is a savings for plastic manufacturers.

Secondly, it is necessary to see the mold in the normal production and manufacturing maintenance, whether easy to break, often to repair. We all know that bad things are bad.

Furthermore, the production of manufactured goods have no flash, there is no burr, the surface is smooth. Have fly edge, have burr, not smooth affirmation is bad, injection molding manufacturer also should arrange a person to deal with burr fly edge, already waste time, have wasted manpower and material resources.